Siemens RVP201.0, Manual, Page: 8 / 12

8/12
Siemens Heating Controller RVP201, RVP211 CE1N2464en
Building Technologies 2017-07-31
Technical Data
Rated operating voltage AC 230 V ( 10 %)
Frequency 50 Hz
Power consumption (no external load) 7 VA
External supply line protection Slow-blow fuse max. 10 A
or
Circuit breaker max. 13 A
Characteristic B, C, D according to
EN 60898
Switching capacity AC 24…230 V, AC 0.02…2 (2) A
Rated current of ignition transformer max.1 A ( max. 30 s)
Switch-on current of ignition transformer max.10 A (max. 10 ms)
External supply line protection See section power supply
Copper cable 0.6 mm 30 m
Copper cable 0.5 mm
2
50 m
Copper cable 1.0 mm
2
80 m
Copper cable 1.5 mm
2
120 m
Screw terminals for wire section up to 2.5 mm
2
Setpoint of normal room temperature
20 ± 0…8 °C
Setback for reduced room temperature –12…0 K
Setpoint of d.h.w. temperature (only
with the RVP211)
10…60 °C
Slope of heating curve
0.25…4
Max. limit of flow or boiler temperature 10…100 °C
ECO heating limit
–10…+8 K (referred to normal setpoint)
Authority of room temperature 0…100 %
Switching differential with two-position
control 1…20 K
Analog time switches 12 hours
Digital weekly time switch with backup battery
Standards, directives and
approvals Product standard EN 60730-1 Automatic electrical controls for household and
similar use
Electromagnetic compatibility
(Applications) For use in residential, commerce, light-
industrial and industrial environments
EU conformity (CE) CE1T2464en_C1 *)
EAC conformity Eurasia conformity
Environmental compatibility Product environmental declaration
(contains data on RoHS compliance,
materials composition, packaging,
environmental benefit, disposal)
CE1E2464 *)
Eco design and labeling di-
rectives Class Efficiency gain
Application with one room temperature sensor and one out-
door temperature sensor and on/off control VII 3.5%
Application with one room temperature sensor and on/off
control III 1.5%
*) The documents can be downloaded from http://siemens.com/bt/download .
Power supply
Output relays
Permissible cable
lengths to the sensors
and the room unit
Connection terminals
Setting ranges
Backup of time
switches