RUGGEDCOM WIN
User Guide
Chapter 4
System Administration
Managing Alarms
45
Section 4.10
Managing Alarms
This section describes how to configure and manage alarms.
CONTENTS
•
Section 4.10.1, “Viewing Alarms”
•
Section 4.10.2, “Clearing Alarms”
Section 4.10.1
Viewing Alarms
To view current system alarms, navigate to
Management » Alarms and Traps
. The
System Alarms
screen
appears.
Figure 41: System Alarms Screen
The table provides the following information:
Parameter
Description
Number of Critical Alarms
Displays the number of critical alarms.
Number of Major Alarms
Displays the number of major alarms.
Number of Warning Alarms
Displays the number of warning or advisory alarms.
The table provides the following information:
Parameter
Description
ID
Displays the alarm type identification number.
Name
Displays the alarm type. For a list of alarm and trap conditions, refer to
.
Status
Synopsis:
{On, Off}
Indicates if the alarm type is enabled or disabled.