Installing the Device
2.5.3 Connecting LTE Antennas
Antenna
Type
Operating
Frequen-
cy (GHz)
Gain (dBi)
Article Number
Reference
2.4
3.0
ANT795-4MA
Omni-Di-
rectional
5.0
5.0
6GK5795-4MA00-0AA0
2.4
3.0
ANT795-4MC
Omni-Di-
rectional
5.0
5.0
6GK5795-4MC00-0AA0
2.4
3.0
ANT795-4MD
Omni-Di-
rectional
5.0
5.0
6GK5795-4MD00-0AA0
2.4
2.0
ANT795-4MX
Omni-Di-
rectional
5.0
2.5
6GK5795-4MX00-0AA0
2.4
ANT795-6DC
Directional
9.0
6GK5795-6DC00-0AA0
Directional
2.4
6.0
AN-
T795-6MN
Omni-Di-
rectional
5.0
8.0
6GK5795-6MN10-0AA6
Directional
2.4
5.0
AN-
T795-6MT
Omni-Di-
rectional
5.0
7.0
6GK5795-6MT00-0AA0
Not for use in Canada.
Must always be used with a 5 m (16 ft) cable (6X1875-5CH50).
Total gain is 3.6 dBi when connected via a 5 m (16 ft) cable (6X1875-5CH50) with a 4.4 dB loss.
Must always be used with a 10 m (33 ft) cable (6X1875-5CN10).
Total gain is 9.2 dBi when connected via a 10 m (33 ft) cable (6X1875-5CN10) with an 8.8 dB loss.
Total gain is 9.1 dBi when connected via a 5 m (16 ft) cable (6X1875-5CH50) with a 4.4 dB loss.
Total gain is 2.6 dBi when connected via a 5 m (16 ft) cable (6X1875-5CH50) with a 4.4 dB loss.
2.5.3
Connecting LTE Antennas
Install a single 4G LTE (Long Term Evolution) antenna for Single-Input Single-Output
(SISO) or dual antennas for Multiple-Input Multiple-Output (MIMO).
To install an LTE antenna, do the following:
WARNING
Radiation hazard – risk of Radio Frequency (RF) exposure.
Antennas must be placed at a distance of at least 35 cm (13.8 in) from all persons
during normal operation. The antennas used for this product must not be located
or operating in conjunction with any other antenna or transmitter, except in accor-
dance with FCC multi-transmitter evaluation procedures.
16
RUGGEDCOM RX1400
Installation Manual, 09/2019, C79000-G8976-1103-13