RUGGEDCOM RX1100
Installation Guide
Chapter 3
Communication Ports
HSPA (GSM) Cellular Modem
29
1
2
3
Figure 31: HSPA Cellular Modem
1.
Receive Diversity Antenna SMA Connector
2.
Access Panel
3.
Main Antenna SMA Connector
Installing a SIM Card
SIM card access is available on the front faceplate of the HSPA module. Follow these steps to install a SIM card:
1. Disconnect power from the device.
2. Remove the protective cover marked
HSPA
.
3. Insert the SIM card with the angled side first. An audible click will indicate the SIM card is in position.
4. Slide the latch over the SIM card to secure it in place.
5. Install the protective cover.
6. Connect power to the device.
Supported Frequency Bands
WARNING!
Electromagnet radiation hazard – risk of serious injury. Do not exceed the maximum antenna gain.
Aside from causing cellular interference for other devices that use the same band, adverse health
effects for individuals in the area may occur.
Frequency Range
Band
Tx (MHz)
VSWR
Rx (MHz)
VSWR
RX Diversity
Support
Maximum
Allowable
Gain (dBi)
Band I
WCDMA 2100
1920-1980
<2.5:1
2110-2170
<3.5:1
Y
4
Band II
WCDMA 1900
1850-1910
<2.5:1
1930-1990
<2.5:1
Y
4
Band V
WCDMA 850
824-849
<2.5:1
869-894
<3.5:1
Y
5
Band VI
WCDMA 800
830-840
<2.5:1
875-885
<3.5:1
Y
5
GSM 850
824-849
<2.5:1
869-894
<3.5:1
5
EGSM 900
880-915
<2.5:1
925-960
<3.5:1
5
GSM 1800
1710-1785
<2.5:1
1805-1880
<3.5:1
4
GSM 1900
1850-1910
<2.5:1
1930-1990
<2.5:1
4
