RUGGEDCOM RX1000P
Installation Guide
Chapter 3
Communication Ports
WAN Ports
19
Section 3.2
WAN Ports
The RX1000P can optionally be equipped with T1/E1 WAN ports, which communicate on standard telephony
communication lines.
T1/E1 WAN ports are equipped with standard RJ45 receptacles. The following is the pin-out for the T1/E1 ports:
1
8
Figure 17: RJ45 T1/E1 Port Pin Configuration
Pin
Description
1
RRING
2
RTIP
3
Reserved (Do Not Connect)
4
TRING
5
TTIP
6
Reserved (Do Not Connect)
7
Reserved (Do Not Connect)
8
Reserved (Do Not Connect)
Section 3.3
DSL Ports
The RX1000P can optionally be equipped with a dual-port DSL (Digital Subscriber Line) card, which can
communicate over standard telephone communication lines. The DSL card supports the following modulation
standards:
• G.992.1 (G.DMT)
• G.992.2 (G.Lite)
• G.992 Annex A (ADSL over POTS)
Each DSL card is equipped with standard RJ11 telephone ports. The following is the pin-out description for the
RJ11 ports:
1
6
Figure 18: RJ11 Port Port Pin Configuration
Pin
Description
1
Reserved (Do Not Connect)
2
Reserved (Do Not Connect)
3
Ring
4
Tip
5
Reserved (Do Not Connect)
6
Reserved (Do Not Connect)
