RUGGEDCOM RS930W
Installation Guide
Chapter 3
Communication Ports
Fiber Optic Ethernet Ports
13
Communication Ports
The RS930W can be equipped with various types of communication ports to enhance its abilities and
performance. To determine which ports are equipped on the device, refer to the factory data file available through
ROS . For more information on how to access the factory data file, refer to the
ROS User Guide
for the RS930W.
Each communication port type has a specific place in the RS930W chassis.
1
2
3
Figure 8: Port Assignment
1.
Ports 1 to 6
2.
Port 7
3.
Port 9
Port
Type
1 to 6
Fast Ethernet Ports (10/100Base-TX)
7
EoVDSL Port
9
Wireless Antennas
The following sections describe the available ports:
•
Section 3.1, “Fiber Optic Ethernet Ports”
•
Section 3.2, “Wireless Ethernet Ports”
•
Section 3.3, “EoVDSL Ports”
Section 3.1
Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Registered Jack), LC (Lucent
Connector), SC (Standard or Subscriber Connector) or ST (Straight Tip) connectors. Make sure the Transmit (Tx)
and Receive (Rx) connections of each port are properly connected and matched to establish a proper link.
