Siemens RUGGEDCOM RS910 Installation Manual Download

Page: 47 / 52

Certification
6.1.8 RoHS

The device is marked with an RCM symbol to indicate compliance when sold in the

Australian region.

A copy of the Declaration of Conformity is available via Siemens Industry Online Sup-

port at

https://support.industry.siemens.com/cs/ww/en/view/89855782

6.1.8

RoHS

This device is declared by Siemens AG to meet the requirements of the following Ro-

HS (Restriction of Hazardous Substances) directives for the restricted use of certain

hazardous substances in electrical and electronic equipment:
•

China RoHS 2

Administrative Measure on the Control of Pollution Caused by Electronic Informa-

tion Products

A copy of the Material Declaration is available online at

https://support.indus-

try.siemens.com/cs/ww/en/view/109738831

6.1.9

Other Approvals

This device meets the requirements of the following additional standards:
•

IEEE 1613

IEEE Standard Environmental and Testing Requirements for Communications

Networking Devices in Electric Power Substations

•

IEC 61000-6-2

Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity

for Industrial Environments

•

IEC 61850-3

Communication Networks and Systems in Substations – Part 3: General Require-

ments

6.2

EMC and Environmental Type Tests

The RUGGEDCOM RS910 has passed the following Electromagnetic Compatibility

(EMC) and environmental tests.

RUGGEDCOM RS910

Installation Manual, 02/2020, C79000-G8976-1029-09

Summary of Contents for RUGGEDCOM RS910





















































Search results

Summary of Contents for RUGGEDCOM RS910

Reviews:

Related manuals for RUGGEDCOM RS910

Brands by name

Popular brands

Siemens RUGGEDCOM RS910, Installation Manual

Search results

Summary of Contents for RUGGEDCOM RS910

Reviews:

Related manuals for RUGGEDCOM RS910

Brands by name

Popular brands