Siemens RUGGEDCOM M969F, Installation Manual

Page: 54 / 56

Chapter 7
Certification
RUGGEDCOM M969F
Installation Guide
44 EMC and Environmental Type Tests
IEEE 1613 Type Tests
NOTE
• If the unit contains copper ports, the IEEE 1613 conformance is Class 1 (during disturbance, errors
may occur but recovery is automatic).
• If the unit contains all fiber ports, the IEEE 1613 conformance is Class 2 (during disturbance, no
errors will occur).
Description Test Levels
Enclosure Contact ± 8 kV ESD
Enclosure Air ± 15 kV
Radiated RFI Enclosure ports 35 V/m
Signal ports ± 4 kV @ 2.5 kHz
DC Power ports ± 4 kV
AC Power ports ± 4 kV
Fast Transient
Earth ground ports ± 4 kV
Signal ports 2.5 kV common mode @ 1MHz
DC Power ports 2.5 kV common & differential mode @ 1MHz
Oscillatory
AC Power ports 2.5 kV common & differential mode @ 1MHz
Signal ports 5 kV (Failsafe Relay)
DC Power ports 5 kV
HV Impulse
AC Power ports 5 kV
Signal ports 2 kV
DC Power ports 1.5 kV
Dielectric Strength
AC Power ports 2 kV
Environmental Type Tests
NOTE
Class 2 refers to Measuring relays and protection equipment for which a very high security margin
is required or where the vibration levels are very high, (e.g. shipboard application and for severe
transportation conditions).
Test Description Test Levels Severity Levels
IEC 60068-2-1 Cold Temperature Test Ad -40 °C (40 °F), 16 Hours —
IEC 60068-2-2 Dry Heat Test Bd 85 °C (185 °F), 16 Hours —
IEC 60068-2-30 Humidity (Damp
Heat, Cyclic)
Test Db 95% (non-condensing),
55 °C (131 °F), 6 cycles
—
IEC 60255-21-1 Vibration 2g @ 10-150 Hz Class 2
IEC 60255-21-2 Shock 30 g @ 11 ms Class 2