Siemens RM400 C Series, Operating Manual

Page: 180 / 227

170
RM400 C Models U24802-J-Z146-2-7600
14
Equipment settings
14.2
Drive names
This section lists the drive-specific device names (special files) with which the drives
can be addressed. If you wish to execute a write or read command for a data
medium, you must specify the device name of the drive containing the data medium.
Access to the drives can be defined by means of options. These options and their
meanings are explained, as is the way to determine the device names.
Options (in square brackets) for special file names
Device name
(autoconf output) Type Special file name
fd01 Floppy disk drive /dev/at/flp/rf[0t|x3ht|x3dt]
HP 88780
1
/
2
inch MT, 160 Mbyte /dev/ios0/rstape XXY [h][n][o]
MC23 4 mm MTC
(DAT, 4 Gbytes) /dev/ios0/rstape XXY [h][n][o][c]
MC41 4 mm MTC jukebox
(DAT, 6 x 4 Gbytes) /dev/ios0/rstape
XXY
[h][n][o][c]
MC43 4 mm MTC
(DAT, 2.0 Gbytes) /dev/ios0/rstape
XXY
[h][n][o]
MC10 8 mm MTC
(5 Gbytes and data com-
pression) /dev/ios0/rstape XXY [c][h][n][o]
MC75 8 mm MTC
(20 Gbytes and data
compression) /dev/ios0/rstape XXY [c][h][n][o]
MC12 1/4 inch MTC 525
Mbytes /dev/ios0/rstape
XXY
[h][n][o][v]
OS26 (CD-ROM) CD-ROM (650 Mbyte) /dev/ios0/sdisk XXY s0
OS28 (CD-ROM) CD-ROM (650 Mbytes) /dev/ios0/sdisk
XXY
s0
c Data compression
h High density
n No rewind
o No rewind, leave in block