5/16
Siemens Building Technologies
Room Temperature Controller REV23RF16A/SET
CE1N2269en
HVAC Products
09.10.2003
Menu-driven heating
Menu items
Settings
CAL
Sensor calibration
Setpoint limitation
Optimum start control for the first heating period
(in unit of time per 1 °C)
2-position control
PID mode, self-learning
PID mode, switching cycle 6 or 12 minutes
/
Periodic pump run off / on
Heating / cooling mode
In automatic operating modes, the temperature setpoints can be individually adjusted
for every comfort period and for the continuous operating modes. The temperature
setpoint of economy mode is the same in automatic and continuous operation.
In frost or overtemperature protection mode, the room temperature is constantly moni-
tored. If it falls (rises) below (above) the adjusted setpoint, control to the adjusted frost
or overtemperature protection setpoint
will be ensured.
The controller generates the 24-hour operating mode from its current 24-hour program.
It automatically selects the switch-on time of the first heating / cooling period and the
switch-off time of the last heating / cooling period to generate and display a complete
heating / cooling period. The comfort setpoint used by the controller is the currently
stored standard setpoint of continuous operating mode
. The self-generated 24-hour
operating mode is maintained until another operating mode is selected.
22
64
Z
01
°C
18
20
22
08
10
18
22
h
T
T
Automatically generated
24-hour switching program when 24-hour
24-hour operating mode
operating mode is activated
Temperature
setpoints
Protective function
24-hour operating
mode
Example
