A6V101035984_en--_a
/
2017-01-01
Subject to alteration
Siemens Building Technologies / HVAC Products
Operating instructions
RDH100
The RDH100 is a room thermostat that allows you to set the desired room temperature (setpoint) for the desired
time. The unit features an ergonomic setting knob for easy temperature control.
Display
Actual room temperature in ºC
The unit controls to the selected
comfort temperature
Indicates when heating is
demanded
Replace batteries
Setting knob
Warmer/colder knob for
selecting the temperature
setpoint
Battery compartment
2 alkaline batteries type AA, 1.5 V
Commissioning
·
Remove the black transit tabs from the 2 alkaline batteries. Check to see if the
battery compartment is in its correct position
·
If no batteries are inserted, fit 2 alkaline batteries type AA in the battery
compartment
Initial power-up
Once batteries are inserted, all symbols are
displayed as shown for about 2 seconds.
Changing the batteries
1.
Get 2 new alkaline batteries type AA, 1.5 V.
2.
Within 1 minute: pull out the battery compartment and remove
the batteries, insert the new batteries and replace the battery
compartment.
3.
Make certain the old batteries are disposed of properly,
in compliance with environmental requirements.
Selecting the required temperature
·
Turn the setting knob counter-clockwise to
decrease the setpoint, or clockwise to
increase the setpoint in increments of 0.5 °C
·
The required temperature is displayed next
to the comfort temperature symbol
Energy saving tips without sacrificing comfort
·
Never allow room temperatures to exceed 21
˚
C
·
Air out rooms for short periods of time only, but properly,
with the windows wide open
DE
EN
FR
IT
NL
ES
PT
CS
HU
PL
SV
FI
ZH
TR
EL
RO
DA
Summary of Contents for RDH100
Page 2: ...blank page ...
