10
MAN-100472
RD150 - Operating Instructions
57030-EN-180717
4 … 20 mA mode:
when connected to a 4 … 20 mA signal cable,
RD150 operates exclusively as a display instrument.
Adjustment range: Indication scaling RD150
HART mode:
when operated with a 4 … 20 mA/HART sensor, the
RD150 operates as display and HART adjusment instrument.
The parameter adjustment of the sensor is carried out via HART com-
munication. During the parameter adjustment, the RD150 operates as
a Primary or Secondary Master to the sensor.
Adjustment range: Sensor adjustment, indication scaling RD150
HART multidrop:
the RD150 can be also used as an indicating
device for a bus participant in a HART multidrop system.
Adjustment range: Sensor adjustment for a bus participant, indication
scaling RD150
3.3 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "
Supplement -
Technical data - Ambient conditions
"
•
Relative humidity 20 … 85 %
With instrument weights of more than 18 kg (39.68 lbs) suitable and
approved equipment must be used for lifting and carrying.
Modes
Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature
Lifting and carrying
