Siemens RAB20 Series Technical Instructions Download Page 9

RAB20 Series Two-pipe Fan Coil Room Thermostat Technical 

Instructions 

 

Document Number 155-526P25 

 

March 2, 2007 

Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as 
design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their respective owners. 
© 2007 Siemens Building Technologies, Inc.

 

Siemens Building Technologies, Inc.

 

1000 Deerfield Parkway 
Buffalo Grove, IL  60089-4513 
U.S.A. 

Your feedback is important to us. If you have 
comments about this document, please send them to 

[email protected]

 

Dimensions 

Dimensions in inches 
(millimeters) 

 

 

3.80

(96.4)

4.45

(113.1)

1.68

(42.8)

TH0495R2

 

 

 

Figure 7.  RAB20… Unit. 

1.18

(30)

0.66

(16.9)

2.56 (65)

1.97 (50)

0.51 (13)

2.56

(65)

0.51

(13)

1.18

(30)

1.38

(35)

0.46

(11.8)

1.00

(25.5)

3.9

(99)

3.38
(86)

Ø 0.14 (3.6)

Ø 0.25 (6.4)

TH0496R2

Figure 8.  Base Plate. 

 

0.91(23) 0.91(23)

0.91(23)

0.91(23)

1.64(41.75)

1.64(41.75)

4.72(120)

4.72(120)

TH0512R1

3.29(83.5)

 

0.33(8.5)

1.1(28)

1.1(28)

1.17(29.6) 1.1(28)

1.18(30)

1.18(30)

0.04(1)

1.1(28)

1.1(28)

4.21(107)

4.21(107)

TH0513R1

 

 

Figure 9.  ARG70. 

 

 

 

Document No. 155-526P25 

Country of Origin:  US 

Page 9 

 

Summary of Contents for RAB20 Series










Reviews: