©
S
iem
ens
A
G
20
01
, G
:\M
obi
l\Q
ui
ckP
icC
am
era
\Qu
ick
Pi
c_
Camer
a_
en
.fm
left page (4)
of QuickPic Camera multilang, A31008-H5701-A103-1-QK19 (27. September 2002,
QuickPic Camera IQP-500 (en)
4
General notes
You can use the QuickPic Cam-
era when it is connected to a
compatible mobile phone such
as the Siemens S55. The Quick-
Pic Camera uses the mobile
phone’s power supply and dis-
play.
The QuickPic Camera is operated
exclusively using the controls on
the mobile phone. You can find
a description of the controls in
your mobile phone manual.
More information is also availa-
ble on the internet at
www.my-siemens.com/quickpic
or through our Service Hotline
Using the QuickPic
Camera to take pic-
tures
The following describes the ba-
sics of taking pictures.
What appears on the mobile’s
display and which mobile phone
controls are used for QuickPic
Camera may differ depending
on which mobile phone is used.
Please read the manual for your
mobile phone.
Connecting to your mobile
phone
Connect the QuickPic Camera to
the mobile phone as shown in
the diagram.
The mobile phone must be
compatible with the QuickPic
Camera or the camera may
be damaged.
Never attempt to connect the cam-
era as shown in the diagram above.
This could damage both the camera
and your mobile phone.
If you receive a call when the camera
is connected to the mobile phone, we
recommend you disconnect the cam-
era to answer it as the QuickPic Cam-
era may obscure the microphone.
