Siemens ProtoAir Start-up Guide
Page 27 of 66
9.2.1 Update W ired Network Settings
IP Settings tab is the landing page when selecting Network Settings on the navigation tree. To change the
IP settings, follow these instructions:
•
Enable DHCP Client State to automatically assign IP Settings or modify the settings manually as
needed, via these fields: IP Address, Netmask, Default Gateway and Domain Name Server1/2.
NOTE: If connected to a router, set the Default Gateway to the same IP Address as the router.
•
Click Update IP Settings, then click on System Restart to restart the Gateway and activate the new
IP Address.
•
Connect the ProtoAir to the local network or router.
NOTE: If the FS-GUI was open in a browser, the browser will need to be pointed to the new IP
Address of the ProtoAir before the FS-GUI will be accessible again.
IP Setting Fields
Definition
Connection Status
Status of connection
MAC Address
Ethernet MAC Address
Tx/Rx Msgs
Number of transmitted and received messages
Tx/Rx Msgs Dropped
Number of unanswered Tx or Rx messages
Figure 21: FS-GUI Ethernet Port Network Settings