Siemens Profiset 70isdn Operating Instructions Manual Download

Page: 68 / 118

Convenient and secure telephone communication

kap09.fm5

Profiset 70isdn, GB: A30853-X300-B501-3-7619

20.5.99

Switching from handsfree mode to open listening

Prerequisite: you are conducting a call, the handset is on-

hook, and the loudspeaker and microphone are switched

on.

Switching from open listening to handsfree mode

Prerequisite: you are conducting a call, the handset is lift-

ed and the loudspeaker switched on; LED lights up.

Switching to mute (consultation in the room)

If there are times when you do not want your calling party

to hear your conversation, e.g. if there is a consultation in

the room, you can switch your telephone to "mute". The

following are then switched off, depending on the mode

of operation:

●

the handset microphone, or

●

the handsfree conversing microphone.

Prerequisite: you have programmed a "Mute"

function key

(

➔

page 42).

You can adjust the loudspeaker volume with the

and

keys during a call with the handset

on-hook.

Lift the handset. The microphone and loudspeaker are

switched off.

Press the Loudspeaker

key; LED lights up.

To end the call, replace the handset. The connection is

cleared down and the loudspeaker is switched off.

Loudspeaker

and

To activate handsfree mode, hold down the "Loudspeak-

er" key whilst you replace the handset; the loudspeaker

LED lights up.

The microphone is switched on.

At the end of the call, press the "Loudspeaker" key; LED

goes out.

The connection is closed, the loudspeaker and micro-

phone are switched off.

Loudspeaker

You are conducting a call.

To activate the mute function press the "Mute" key; LED

flashes.

The microphone is switched off.

To deactivate the mute function press the "Mute" key

again; LED goes out.

The microphone is switched on again.

Mute

Summary of Contents for Profiset 70isdn























































































































Search results

Summary of Contents for Profiset 70isdn

Reviews:

Related manuals for Profiset 70isdn

Brands by name

Popular brands

Siemens Profiset 70isdn, Operating Instructions Manual

Search results

Summary of Contents for Profiset 70isdn

Reviews:

Related manuals for Profiset 70isdn

Brands by name

Popular brands