Siemens PH2511D, Instruction Manual

Page: 12 / 26

10
en
Congratulations on purchasing this
Siemens appliance. You have acquired
a high-quality product that will bring
you a lot of enjoyment.
These operating instructions describe a
hairdryer with accessories.
Controls and accessories
1 Temperature toggle switch
k
– Setting 1 = low
– Setting 2 = medium
– Setting 3 = high
2 Fan toggle switch
l
– Setting 0 = off
– Setting 1 = gentle
– Setting 2 = strong
3
Lockable Cool button
3
4 Air inlet grill
5 Styling nozzle
6 Hanging eyelet
Use
The blow and temperature settings can be
freely combined.
General
■ Never cover the blower or air inlet.
■ Make sure the air inlet is free of lint and
hair.
■ The hairdryer will switch off automatically
if it overheats due to the air inlet being
covered. It will switch back on automati -
cally after a few minutes.
Important:
Be sure to unplug the appliance
and wait a few minutes until it has cooled
down. It can then be used as before.
■ To pre-dry wet hair, select the higher set -
ting 2. Hold the appliance about 10 cm
away from your head.
Cool button
3
The Cool function is ideal for ‚setting‘ the
hair after drying. It fixes the individual hair
sections with the cool airflow.
Press the Cool button
3
to activate the
cooling function in any setting.
Press the Cool button
3
again to switch off
the cooling function.
Styling nozzle
The styling nozzle
5
is specially designed
for drying and styling sections of hair.
Attach the styling nozzle 5 to
the appliance. Make sure it
clicks into place. The nozzle
can be turned as required.
Use
■ Set the fan and temperature to a higher
setting.
■ Direct the air stream right onto the section
of hair you want to style.
■ To fix the hair, switch on the Cool
button
3
and repeat the process.
Important: The nozzle should never actually
touch the hair.
Warning! The styling nozzle 5 can become
hot. Allow it to cool down before detaching.