Siemens optiPoint 500 advance User Manual Download

Page: 106 / 127

Step by Step

Making multiline calls

106

Confirm.

Group park and retrieval of call

You can park a call within the call pickup group on one
telephone and then continue it at a different telephone.

Parking the call:

Press the key. The key flashes at all telephones in the
team.

Replace the handset.

Retrieving the call:

Press the flashing key. Continue the call.

Calling a station directly

Precondition:

DSS keys have been configured at your

telephone (

page 62).

The lamp statuses of direct station selection
(DSS) keys

The lamp is not lit – the user is not making a call.

The lamp is lit – the user is making a call.

The lamp is flashing – there is an incoming call for the
user; the user has not answered it yet.

Activate?

Call park

Jones

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands