Siemens OpenStage 60 T User Manual Download

Page: 70 / 199

Step by Step

Enhanced phone functions

Placing an external call on hold

If you have programmed a hold key on your phone

page 87, you can put external calls on hold.

Then all other stations can accept the call on the as-
signed trunk.

Press the "Hold" key.

The message of the relevant trunk appears (e.g. 801)
and note the trunk number.

If available, the LED of the assigned trunk key flashes
slowly.

if nec.

Replace the handset or press the key shown.

Depending on the configuration, this may be necessary
so other members can also pick up the call on hold.

Picking up a held call:

Prerequisite:

One or more calls are on hold. The phone

is idle.

Open the Program/Service menu

page 40.

Select and confirm the option shown.

If the "Retrieve"

page 87 key is available, press it.

Enter the noted trunk number.

If there is a "Line:" key available for the relevant trunk,
this flashes slowly. Press the key shown.

Held on line: 801

Retrieve line

Summary of Contents for OpenStage 60 T








































































































































































































Search results

Summary of Contents for OpenStage 60 T

Reviews:

Related manuals for OpenStage 60 T

Brands by name

Popular brands

Siemens OpenStage 60 T, User Manual

Search results

Summary of Contents for OpenStage 60 T

Reviews:

Related manuals for OpenStage 60 T

Brands by name

Popular brands