Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download

Page: 47 / 120

Making Calls – Convenience Functions

Step by step

Making calls

Dialing with a direct station selection key

Prerequisite:

You have configured direct station selec-

tion keys on your telephone

page 16 and

page 73.

Press the DSS key.

Lift the handset.

Press the key and enter speakerphone mode.

Dialing a phone number from a list

Information on the features of the call log as well as a
display example for an entry is provided on

page 25.

Open the idle menu.

Select and confirm.

The latest entry in the relevant list is shown, see the ex-
ample on

page 25.

For information on the meanings of the LED dis-
plays of the DSS keys, see

page 16.

If your belongs to an ONS group (parallel call

page 112), please note the following:

A call log is maintained for all phones in an ONS
group. The call log can be viewed by any internal
member of the ONS group with a system tele-
phone.

Unanswered calls?

Incoming calls?

Outgoing calls?

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands