Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download Page 16

Page: 16 / 120

Getting to Know Your OpenStage Phone

Programmable sensor keys

Your OpenStage 40 has 6 illuminated sensor keys. You can assign func-
tions to them on two levels.

Depending on how they are programmed, you can use the sensor keys as:
•

sensor key with function

page 72

•

Direct destination/Direct station selection key

page 73

Touch the key to activate the programmed function or dial the stored num-
ber.

Press the key to open a menu for programming it

page 72.

A label for the function is displayed to the left of the key; it cannot be
changed. You can define the labeling for repdial or DSS keys according to
your requirements

page 75.

The status of a function is shown by the LED on the corresponding sensor
key.

Explanation of LED displays for programmed sensor keys

Increase the number of sensor keys by adding a key module

page 13.

Only for direct destination selection keys can you program the se-
cond level, also for direct destination selection.

LED

Meaning of function key

Meaning of DSS key

Off

The function is deactivated.

The line is free.

Flas-
hing

[1]

[1] In this manual, flashing sensor keys are identified by this icon, regardless of the flashing in-

terval. The flashing interval represents different statuses, which are described in detail in
the corresponding sections of the manual.

The function is in use.

The line is busy.

The function is activated.

There is a call on the line.

The programmable sensor keys on multi-line phones function as
line keys

page 87.

Mirea, Ch

Shift X

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands