Siemens OpenStage 40 HFA HiPath 4000 Operation Manual Download

Page: 72 / 120

Step by step

Programming Sensor Keys

You can program frequently used functions or phone
numbers onto the sensor keys on your OpenStage 40

page 16. The available functions are offered while

the sensor key is being programmed.

Saving a function to a sensor key

Open the service menu

page 26.

Select and confirm.

Press the programmable sensor key.

Confirm the option shown.

Select the required function.

Confirm the option shown.

The label appears automatically and cannot be altered.

The LED display shows the status of the function

page 16.

Key function?

Change?

The available functions depend on your configu-
ration. If a function is missing, contact your ser-
vice personnel.

Save?

Briefly touching the key activates the program-
med function. For functions that can be switched
on/off, such as second call, press once to switch
the function on and again to switch it off. When
the function is switched on, the LED lights up.

Summary of Contents for OpenStage 40 HFA HiPath 4000

























































































































Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands

Siemens OpenStage 40 HFA HiPath 4000, Operation Manual

Search results

Summary of Contents for OpenStage 40 HFA HiPath 4000

Reviews:

Related manuals for OpenStage 40 HFA HiPath 4000

Brands by name

Popular brands