HiPath 8000 functions
77
Step by Step
Call forwarding unconditional
With
Call forwarding unconditional
(CFV), all incom-
ing calls are forwarded to a different destination.
You can use the feature code to activate/deactivate this
function and define a forwarding destination.
Activating
^
Lift the handset.
j
Enter the access code (see access code table
Æ
page 87) and the forwarding destination. After the
confirmation tone, the
r
key lights up and the for-
warding is indicated on the display.
If the "Courtesy call" function is active, the HiPath 8000
dials the phone to which you forwarded your calls.
•
If the party at this phone answers, you can inform
him or her that your calls are being forwarded. Now
the
r
key lights up and the forwarding is indica-
ted on the display.
•
If the party does not answer or the station is busy,
activate the feature once again. If you complete this
operation within two minutes, you will hear the con-
firmation tone followed by the dial tone. The
HiPath 8000 does not output an acoustic signal to
inform the other party at the forwarding destination
about the second activation.
If
Call forwarding unconditional
is active, calls for-
warded when the line is idle are signaled by a short ring
burst (around 0.5 seconds) at the forwarded station.
This is a reminder that this feature is active.
Deactivating
^
Lift the handset.
j
Enter the access code (see access code table
Æ
page 87). You hear the confirmation tone.
