7 / 10
Siemens
VAV compact controller KNX / PL-Link GDB181.1E/KN and GLB181.1E/KN
CE1N3547en
Building Technologies
2016-01-29
Disposal
The device is considered an electronics device for disposal in terms of
European Directive 2012/19/EU and may not be disposed of as do-
mestic garbage.
Dispose of the device through channels provided for this pur-
pose.
Comply with all local and currently applicable laws and regula-
tions.
Technical Data
Power supply AC 24 V
Operating voltage / frequency
AC 24 V ±20 % / 50/60 Hz
(SELV/PELV)
G (core 1, red) and
Power consumption at
G0 (core 2, black)
Actuator
holds
1 VA/0.5 W
Actuator
rotates
3 VA/2.5 W
Damper actuator
Nominal torque
5 Nm (GDB) / 10 Nm (GLB)
Maximum
torque
<7 Nm (GDB) / <14 Nm (GLB)
Nominal rotation angle / maximum rotation angle
90° / 95° 2°
Running time for nominal rotation angle 90°
150 s (50 Hz) / 125 s (60 Hz)
Direction of rotation (adjustable with
ACS941
)
Clockwise / counter clockwise
KNX-Bus
Connection type
KNX, TP1-256 (el. insulated)
Bus load
5 mA
Bus topology
Refer to Technical Basics P3547
Configuration and
maintenance interface
Terminal strip
7-pin, grid 2.00 mm
Connection cable
Cable length
0.9 m
Number of cores and cross-sectional area
2 x 0,75 mm
2
Degree of protection and
safety class
Degree of protection acc. to EN 60529
(Refer to mounting instruction)
IP54
Safety class acc. to EN 60730
III
Environmental conditions
Operation / transport
IEC 721-3-3 / IEC 721-3-2
Temperature
0...50 °C / 25…70 °C
Humidity
(non-condensing)
<95% r.h. / <95% r.h.
Standards and Regulations
Product safety
Automatic electric controls for household and similar use EN 60730-2-14 (mode of action type 1)
Electromagnetic compatibility (Application)
For residential, commercial and
industrial environments
EU Conformity (CE)
GDB181.1E/KN GLB181.1E/KN
A5W00003842
1)
A5W00000176
1)
RCM Conformity
GDB181.1E/KN GLB181.1E/KN
A5W00003843
1)
A5W00000177
1)
Product environmental declaration
2)
CM2E4634E
1)
Dimensions
W x H x D
71 x 158 x 61 mm
Suitable drive shafts
Type of drive shaft
Round
8...16 mm
Round, with centering element
8...10 mm
Square
6...12.8 mm
Min. drive shaft length
30 mm
Max. shaft hardness
<300 HV
Weight
Without packaging
0.6 kg
Air volume controller
3-position controller with hysteresis
max
V
, adjustable (resolution 1 % / factory setting 100 %)
20…120 %
min
V
, adjustable (resolution 1 % / factory setting 0 %)
-20…100 %
n
V , adjustable (resolution 0.01 / factory setting 1.00)
1…3,16
n
V = 1 300 Pa at nominal air volume flow
