The method is the part of the application that contains the parameters for controlling the
hardware used by one cycle clock. It provides peak areas and component concentrations and
includes all cycle clock timed events. There is one cycle clock per method.
Status
LEDs
Access hole for mounting
screw for Temp Setpoint modules
Ignite Signal/
Igniter Power
Location
ID Switch
RTD Temp Control Input
Flame Sense and
Filament Detector Input
Signal Cable
from Detector
Mezzanine
Module
Mounting
Location
Figure 3-5
Base3DPM With Mezzanine Module
Part Number
The Base3 DPM (Part Number A5E02645925001) is shipped with current analyzers. It can
be used as a replacement part for earlier DPMs in Maxum I analyzers using an adapter, part
number A5E34938458001.
Flame Photometric Detector
3.5 Base3 Detector Personality Module (DPM)
Maxum Edition II Detectors
24
Service Manual, May 2018, A5E42019847001