Status
LEDs
Access hole for mounting
screw for Temp Setpoint modules
Ignite Signal/
Igniter Power
Location
ID Switch
RTD Temp Control Input
Flame Sense and
Filament Detector Input
Signal Cable
from Detector
Mezzanine
Module
Mounting
Location
Figure 2-26 Base3DPM With Mezzanine Module
Part Number
The Base3 DPM (Part Number A5E02645925001) is shipped with current analyzers. It can
be used as a replacement part for earlier DPMs in Maxum I analyzers using an adapter, part
number A5E34938458001.
Electronic Compartment Component Descriptions and Maintenance Procedures
2.5 Detector Personality Modules
Maxum II Reference Manual
62
Manual, 7/2017, 2000596-001