This executable file needs a definition or init file, named
SWUP.INI
, to define the message
language preferences and the hardware communication port set up.
The content of this file consists of the following text:
Where x is the number that corresponds to the serial port that is used, either 1, 2 or 3.
Flow chart 2.1 illustrates the software programming process.
FLOWCHART 2.1 SOFTWARE PROGRAMMING. PROCESS
No
Yes
Yes
No
No
Yes
Yes
No
Yes
No
Plug in the Boot
Adaptor to the
PC and Mobile
Connect the AC
adaptor to the
Boot Adaptor
Power up Boot
Adaptor &
Check LED
OK
?
Check AC
Adaptor
OK
?
Faulty AC
Adaptor
Faulty Boot
Adaptor
Power up the PC
in DOS
environment
Execute the
“Mobile S/W”
Error
?
Check
H/W setup = S/W
settings.
OK
?
Software
upgrading in
progress
Correct settings.
Error
?
Test Mobile
Take note of
error and repeat
process again
Feedback Error
to ICP CD ASC
END
Language=English
COM=x
