Siemens
Siemens
Siemens
Siemens
Siemens Industry
Industry
Industry
Industry
Industry,,,,, Inc.
Inc.
Inc.
Inc.
Inc.
Building
Building
Building
Building
Building T
TT
TTec
ec
ec
ec
echnologies Di
hnologies Di
hnologies Di
hnologies Di
hnologies Division
vision
vision
vision
vision
P/N 315-034090-11
INTRODUCTION
The Model LVM Live Voice Module from Siemens
Industry, Inc. provides firefighters with a means of
sending live voice messages to specified audio
zones. The LVM has a push-to-talk switch on the
microphone, as well as a retractable coiled cord.
Both the push-to talk switch and the microphone
are supervised. The LVM has a built-in speaker to
preview active tones and messages. Each DAC-
NET in the system (with an LPB) supports up to
five LVMs. Additional LVMs may be
connected remotely using the RNI.
OPERATION
Controls and Indicators
The front panel of the LVM contains
six switches and six pairs of LEDS.
Each pair contains one bi-color (red/
green) and one yellow LED. The
functions of the switches and LEDs
are programmed using the Zeus Tool
(Refer to the Zeus Quick Start Guide,
P/N 315-033875). All LEDs can be
programmed ON, OFF, or FLASHING.
These switches are used for manual
control of the voice system.
The functions of the remaining LEDs and push buttons are defined as follows:
PREANNOUNCE TONE
(Yellow)
When illuminated, indicates that the
preannounce tone is active at the
speakers.
READY TO PAGE
(Green)
When illuminated, indicates that all
selected zones are ready to be paged.
MONITOR VOLUME
These two pushbuttons increase or
decrease the volume of the speaker on
the LVM.
Live Voice Module
Installation Instructions
Model LVM
Figure 1
LVM Live Voice Module
