background image

en 

Safety

2

Table of contents

Safety ............................................................................  2

Preventing material damage .......................................  4

Environmental protection and saving energy............  5

Operating modes .........................................................  5

Familiarising yourself with your appliance ................  5

Before using for the first time .....................................  6

Basic operation ............................................................  6

Hob-based hood control..............................................  8

Home Connect .............................................................  8

Cleaning and servicing ..............................................  10

Troubleshooting.........................................................  13

Customer Service.......................................................  13

Accessories................................................................  14

Disposal......................................................................  14

Installation instructions.............................................  14

Safety

Please read the safety information to ensure
that you use the appliance safely.

General information

You can find general information about this in-
struction manual here.

¡

Read this instruction manual carefully. Only
this will ensure you use the appliance
safely and efficiently.

¡

This manual is intended for the installer and
the user of the appliance.

¡

Follow the safety instructions and warnings.

¡

Keep the instruction manual and the
product information safe for future refer-
ence or for the next owner.

¡

Check the appliance after unpacking it. Do
not connect the appliance if it has been
damaged in transit.

Intended use

Read the information on intended use to en-
sure that you use the appliance correctly and
safely.

The appliance can only be used safely if it is
correctly installed according to the safety in-
structions. The installer is responsible for en-
suring that the appliance works perfectly at its
installation location.
Only use this appliance:

¡

In accordance with these instructions for in-
stallation and use.

¡

In private households and in enclosed
spaces in a domestic environment.

¡

Up to an altitude of max. 2000 m above
sea level.

Do not use the appliance:

¡

With an external timer.

Restriction on user group

Avoid risks to children and vulnerable per-
sons.
This appliance may be used by children aged
8 or over and by people who have reduced
physical, sensory or mental abilities or inad-
equate experience and/or knowledge,
provided that they are supervised or have
been instructed on how to use the appliance
safely and have understood the resulting
dangers.
Children must not play with the appliance.
Children must not perform cleaning or user
maintenance unless they are at least 15 years
old and are being supervised.
Keep children under the age of 8 years away
from the appliance and power cable.

Safe use

Follow these safety instructions when using
the appliance.

WARNING ‒ Risk of suffocation!

Children may put packaging material over
their heads or wrap themselves up in it
and suffocate.

Keep packaging material away from
children.

Do not let children play with packaging
material.

WARNING ‒ Risk of poisoning!

Risk of poisoning from flue gases being
drawn back in. Room-air-dependent heat-
producing appliances (e.g. gas, oil, wood
or coal-operated heaters, continuous flow
heaters or water heaters) obtain combus-
tion air from the room in which they are

Summary of Contents for LR26CBS20





























Reviews: