background image

Cleaning and servicing

 en

11

Cleaning controls

WARNING ‒ Risk of electric shock!

Penetrating moisture may cause an electric shock.

Do not use wet sponge cloths.

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 10

2.

Clean using a damp sponge cloth and hot soapy
water.

3.

Dry with a soft cloth.

Removing the grease filter

WARNING ‒ Risk of injury!

¡

The filter cover may swing out.

Open the filter cover slowly.

Take hold of the filter cover after opening until it
no longer swings out.

Close the filter cover slowly.

¡

Oscillating movement of the appliance may result in
injury.

Do not do anything that makes the appliance os-
cillate.

When moving the appliance up and down, leave
sufficient distance to the appliance.

¡

If appliances supported by cables oscillate, this may
overload the fastening elements. The appliance may
fall down.

Do not do anything that makes the appliance os-
cillate.

1.

Press the lock on the filter cover.

To prevent the filter cover from swinging down sud-
denly, hold onto the filter cover firmly with two
hands.

2.

Open the filter cover by pulling it downwards.

3.

ATTENTION!

 Falling grease filters may damage the

hob below.

Grip below the grease filter with one hand.

Open the locks on the grease filters.

4.

Remove the grease filters from the holders.
To prevent grease from dripping, hold the grease fil-
ter horizontally.

Cleaning grease filters manually

The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal.

WARNING ‒ Risk of fire!

Fatty deposits in the grease filters may catch fire.

Clean the grease filters regularly.

Requirement:

 The grease filters have been removed.

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 10

2.

Soak the grease filter in hot soapy water.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.

3.

Use a brush to clean the grease filters.

4.

Rinse the grease filters thoroughly.

5.

Allow the grease filters to drain.

Summary of Contents for LR18HLT25

























Reviews: