Only qualified, competent installation contractors or electricians thoroughly
familiar with applicable codes, standards and regulations should install these
standby electric power systems. Installers must comply strictly with all codes,
standards and regulations pertaining to the installation.
After the system has been installed, do nothing that might render the installation
in non-compliance with such codes, standards and regulation
NFPA STANDARDS
The following published standards booklets pertaining to standby electric
systems are available from the National Fire Protection Association (NFPA),
1 Batterymarch Park, Quincy, MA 02269:
• NFPA No. 37, STATIONARY COMBUSTION ENGINES AND GAS TURBINES
• NFPA No. 54, NATIONAL FUEL GAS CODE
• NFPA No. 58, LIQUIFIED PETROLEUM GAS CODE
• NFPA 70, NATIONAL ELECTRIC CODE (NEC)
• NFPA 99, STANDARD FOR HEALTH CARE FACILITIES
• NFPA 101, LIFE SAFETY CODE
• NFPA 110, STANDARD FOR EMERGENCY AND STANDBY POWER SYSTEMS
• NFPA 220, STANDARD TYPES OF BUILDING CONSTRUCTION
NOTE:
It is essential to use the latest version of any standard
to ensure that the generator and its accessories
comply with all the applicable standards and local codes.
OTHER PUBLISHED STANDARDS
In addition to NFPA standards, the following information pertaining to the
installation and use of standby electric systems is available:
• Article X, NATIONAL BUILDING CODE, available from the American Insurance
Association, 85 John Street, New York, N.Y. 10038.
• AGRICULTURAL WIRING HANDBOOK, obtainable from the Food and Energy
Council, 909 University Avenue, Columbia, MO, 65201.
• ASAE EP-364.2, INSTALLATION AND MAINTENANCE OF FARM STANDBY
ELECTRIC POWER, available from the American Society of Agricultural
Engineers, 2950 Niles Road, St. Joseph, MI 49085.
