Siemens LF98BIP50 Instructions For Installation And Use Manual Download Page 5

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

en

    Environmental protection

4

:

Warning – Risk of injury! 

Components inside the appliance may have 

sharp edges. Wear protective gloves.

Risk of injury! 

Items placed on the appliance may fall 

down. Do not place any objects on the 

appliance.

Risk of injury! 

The light emitted by LED lights is very 

dazzling, and can damage the eyes

(risk group 1). Do not look directly into the 

switched on LED lights for longer 

than 100 seconds.

:

Warning – Risk of electric shock! 

A defective appliance may cause electric 

shock. Never switch on a defective 

appliance. Unplug the appliance from the 

mains or switch off the circuit breaker in the 

fuse box. Contact the after-sales service.

Risk of electric shock! 

Incorrect repairs are dangerous. Repairs 

may only be carried out and damaged 

power cables replaced by one of our 

trained after-sales technicians. If the 

appliance is defective, unplug the appliance 

from the mains or switch off the circuit 

breaker in the fuse box. Contact the after-

sales service.

Risk of electric shock! 

Do not use any high-pressure cleaners or 

steam cleaners, which can result in an 

electric shock.

Risk of electric shock! 

Penetrating moisture may result in an 

electric shock. Clean the appliance using a 

damp cloth only. Before cleaning, pull out 

the mains plug or switch off the circuit 

breaker in the fuse box.

Causes of damage
Caution!

Risk of damage due to corrosion. Always 

switch on the appliance while cooking to avoid 

condensation. Condensate can produce 

corrosion damage.
Always replace faulty bulbs to prevent the 

remaining bulbs from overloading.
Risk of damage due to ingress of humidity into 

the electronic circuitry. Never clean operator 

controls with a wet cloth.
Surface damage due to incorrect cleaning. 

Clean stainless steel surfaces in the direction 

of the grain only. Do not use any stainless 

steel cleaners for operator controls.
Surface damage due to strong or abrasive 

cleaning agents. Never use strong and 

abrasive cleaning agents.

Risk of damage from returning condensate. 

Install the exhaust duct in such a way that it 

falls away from the appliance slightly (1° 

slope).
Risk of damage as a result of incorrect 

loading of design elements. Do not pull design 

elements.Do not place objects on the design 

elements or hang objects from them.

Caution!

There is a risk of surface damage if you do not 

peel off the protective film.Remove the 

protective film from all parts of the appliance 

before using the appliance for the first time.

7

Environmental protection

Environmental protection

Your new appliance is particularly energy-efficient. 

Here you can find tips on how to save even more 

energy when using the appliance, and how to dispose 

of your appliance properly.

Saving energy

During cooking, ensure that there is a sufficient 

supply of air to enable the extractor hood to work 

efficiently and with a low level of operating noise.

Adjust the fan speed to the amount of steam 

produced during cooking. Only use intensive mode 

when required. The lower the fan speed, the less 

energy is consumed.

If cooking produces large amounts of steam, select 

a higher fan speed in good time. If the cooking 

steam has already spread around the kitchen, the 

extractor hood will need to be operated for longer.

Switch off the extractor hood if you no longer require 

it.

Switch off the lighting if you no longer require it.

Clean and (if required) replace the filter at regular 

intervals in order to increase the effectiveness of the 

ventilation system and to prevent the risk of fire.

Put the lid on to reduce cooking steam and 

condensation.

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly 

manner.

This appliance is labelled in accordance with 

European Directive 2012/19/EU concerning 

used electrical and electronic appliances 

(waste electrical and electronic equipment - 

WEEE). The guideline determines the 

framework for the return and recycling of used 

appliances as applicable throughout the EU.

Summary of Contents for LF98BIP50


















Reviews: