Siemens LF98BIP50 Instructions For Installation And Use Manual Download Page 3

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

en

2

Ú

 Table of contents

[en]Instructions for installation and use

INSTRUCTION MANUAL.......................................................... 2

8

Intended use..........................................................2

(

Important safety information ...............................3

7

Environmental protection.....................................4

1

Operating the appliance .......................................5

2

Cleaning and maintenance...................................6

3

Trouble shooting.................................................. 8

4

Customer service................................................. 9

INSTALLATION INSTRUCTIONS .......................................... 10

(

Important safety information ............................ 10

K

General information ........................................... 12

5

Installation .......................................................... 13

INSTRUCTION MANUAL

Produktinfo

Additional information on products, accessories, 

replacement parts and services can be found at 

www.siemens-home.bsh-group.com

 and in the online 

shop 

www.siemens-home.bsh-group.com/eshops

8

Intended use

Intended use

Read these instructions carefully. Only then 

will you be able to operate your appliance 

safely and correctly. Retain the instruction 

manual and installation instructions for future 

use or for subsequent owners.
The appliance can only be used safely if it is 

correctly installed according to the safety 

instructions. The installer is responsible for 

ensuring that the appliance works perfectly at 

its installation location.
This appliance is intended for domestic use 

and the household environment only. The 

appliance is not intended for use outside. Do 

not leave the appliance unattended during 

operation. The manufacturer is not liable for 

damage which is caused by improper use or 

incorrect operation.

This appliance is intended for use up to a 

maximum height of 2000 metres above sea 

level.
This appliance may be used by children over 

the age of 8 years old and by persons with 

reduced physical, sensory or mental capacity 

or by persons with a lack of experience or 

knowledge if they are supervised by someone 

who is responsible for their safety, or have 

been instructed in how to use the appliance 

safely and have understood the risks involved 

in not using it properly.
Children must not play with the 

appliance.Cleaning and user maintenance 

must not be performed by children unless they 

are over 15 years of age and are supervised.
Keep children below the age of 8 years old at 

a safe distance from the appliance and power 

cable.
Check the appliance for damage after 

unpacking it. Do not connect the appliance if it 

has been damaged in transport.
This appliance is not intended for operation 

with an external clock timer or a remote 

control.

Summary of Contents for LF98BIP50


















Reviews: