Siemens LC91KWW60B Instructions For Installation And Use Manual Download Page 17

Page: 17 / 24

Customer service

Accessories

(not included in the scope of delivery)

Note:

These instructions apply to several appliance

models. It may be the case that an optional accessory

that is listed does not apply for your appliance.

Note:

Observe the installation instructions in the

accessory.

--------

Accessories

Order number

Starter set for air-recirculation mode (flat hood

with chimney)
Easy-change filter for starter set

LZ10AFU00

LZ10AFA00

Starter set for air-recirculation mode (flat hood

without chimney)
Easy-change filter for starter set

LZ10AFT00

LZ10AFA00

Starter set for air-recirculation mode (angled hood

with chimney)
Easy-change filter for starter set

LZ10AKU00

LZ10AKA00

Starter set for air-recirculation mode (angled hood

without chimney)
Easy-change filter for starter set

LZ10AKT00

LZ10AKA00

Starter set for air-recirculation mode with filter

that can be regenerated (flat hood with chimney)

LZ10AFS00

Starter set for air-recirculation mode with filter

that can be regenerated (angled hood with chim-

ney)

LZ10AKS00

Starter set for air-recirculation mode with filter

that can be regenerated (flat hood without chim-

ney)

LZ10AFR00

Starter set for air-recirculation mode with filter

that can be regenerated (angled hood without

chimney)

LZ10AKR00

CleanAir air-recirculation module
Easy-change filter for CleanAir air-recirculation

module (cannot be regenerated)

LZ11AXC56
LZ31XXB16

Easy-change filter for CleanAir air-recirculation

module (can be regenerated)

LZ00XXP00

Installation instructions

INSTALLATION INSTRUCTIONS

Installation instructions

Installation instructions

■

This appliance is installed on the wall.

■

If the extractor hood is to be operated in exhaust-air

mode, a flue duct must be fitted.

If the extractor hood is to be operated in air-

recirculation mode, an optional accessory must be

fitted. To do this, refer to the installation instructions

provided.The flue duct does not need to be fitted for

air-recirculation mode.

■

For additional optional accessories, refer to the

installation instructions provided.

■

The surfaces of the appliance are sensitive. Avoid

damaging them during installation.

$ %

PLQ

PLQ PP

PD[PP

PLQ

PLQ PP

PD[PP

Summary of Contents for LC91KWW60B

























Search results

Summary of Contents for LC91KWW60B

Reviews:

Related manuals for LC91KWW60B

Brands by name

Popular brands

Siemens LC91KWW60B, Instructions For Installation And Use Manual

Search results

Summary of Contents for LC91KWW60B

Reviews:

Related manuals for LC91KWW60B

Brands by name

Popular brands