纸张大小：
16
开（
18.4
×
26
厘米）
Cleaning, Maintenance and Repair
Changing the halogen
bulb
Steps to change the halogen bulb:
1. Switch off the extractor hood and isolate by pulling out
the main plug or switching off the disconnector on the
installation side.
Caution!!!
When switched on, the halogen bulb becomes very hot.
Even for some time after the bulbs have been switched
off there is still a risk of burns.
2. Remove the bulb ring with a screwdriver or similar tool.
3. Replace the halogen light bulb (conventional halogen
bulb, 12 Volt, max. 20Watt, G4 cap).
When switched on, the halogen bulb becomes very hot.
Even for some time after the bulbs have been switched
off there is still a risk of burns.
Caution!!!
Refer to plug-in lamp holder: take hold of the bulb with a
clean cloth.
4. Re-insert the bulb ring.
5. Plug the appliance into the mains or switch it on at the
fuse box.
Note:
If the light does not function, check that the bulbs have been
inserted correctly.
16
