纸张大小：
16
开（
18.4
×
26
厘米）
Installation Instruction
Read these instructions carefully and keep them in a safe
place. Safety during use can only be ensured if the
appliance is fitted correctly according to these installation
instructions. The installer is responsible for ensuring that
the appliance operates perfectly at the point of
installation.
For installation, currently applicable building regulations
and the regulations of local electricity and gas suppliers
must be observed.
The appliance must be connected to the mains only by a
licensed and trained technician.
If your kitchen is under renovation, please do not expose
the cooker hood outside, as building materials, dusts,
paints and volatilized gas can corrode and stain the
surface of the cooker hood. The cooker hood must be
installed only after decoration or renovation.
To move and install the cooker hood, do not move it
while grasping the glass frame and the front panel with
hands, so as to avoid breaking or loosening the glass.
If the connecting cable for this appliance is damaged, the
cable must be replaced by the manufacturer or his
customer service or a similarly qualified person in order
to prevent serious injury to the user.
Do not install the cooker hood on a wall made of
inflammable substances such as wood. The wall must be
non-combustible.
Do not let the cooker hood and other gas equipments
(e.g. gas water heater) share the same chimney duct.
The cooker hood follows all the relevant safety
regulations.
The cooker hood must be grounded. A three pin plug is
provided, and this plug must be inserted in a truly
grounded receptacle. In case of current leakage, a
current loop is formed by the grounding to avoid an
electric shock.
Safety Precautions
9
