en
43
Fault
Possible cause
Remedial action
Displays
do not illuminate.
Power failure; the fuse
has been switched off;
the mains plug
has not been inserted
properly.
Connect mains plug. Check whether
the power is on, check the fuses.
Floor of
the refrigerator
compartment is wet.
The condensation
channels
or condensation
drainage pipe are
blocked.
Clean the condensation channels
and the outlet (see “Cleaning
the appliance”). Fig.
,
Stopper is missing
from the condensation
drainage pipe.
Insert stopper.
The cool-fresh
compartment is too
warm.
The fixed setting has
been set too high
or too low (e.g. if there
is frost in the “cool-
fresh” compartment).
The temperature in the “cool-fresh”
compartment can be corrected.
Fig.
2
Simultaneously press buttons 1
and “–” for 2 seconds until
display 3 is activated.
After twenty seconds the set
temperature is stored.
The temperature in
the freezer
compartment is too
warm.
Appliance opened
frequently.
Do not open the appliance
unnecessarily.
The ventilation
openings have been
covered.
Remove obstacles.
Large quantities of
fresh food are being
frozen.
Do not exceed max. freezing
capacity.
Warning signal
sounds, “Alarm”
display lights up.
Fig.
2
/4
The freezer
compartment is too
warm! Frozen food
is at risk!
To switch off the warning signal and
the flashing display, press the Alarm
button 10.
Appliance is open.
Close the appliance.
Ventilation openings
have been covered.
Ensure that there is adequate
ventilation.
Too much food was
placed in the freezer
compartment at once.
Do not exceed max. freezing
capacity.
Summary of Contents for KG F Series
Page 115: ...1 ...
Page 116: ...2 3 4 ...
Page 117: ...5 6 7 8 9 ...
