NL
odors
Save energy
If you smell unpleasant odors:
■
Place the device in a dry, well-
ventilated room! Do not place the
device directly in the sun or near a
heat source such as a heating radiator
or stove.
1. Switch off the appliance with the On/
Off button. Fig. "/1
2. Remove all food from the appliance.
3. Clean the interior (see chapter
Cleaning the appliance).
If necessary, use an insulation board.
■
Allow hot dishes and drinks to cool
down before placing them in the
appliance.
4. Clean all packaging.
5. Pack strong-smelling foods in an
airtight container to prevent odors.
■
Place frozen foods in the refrigerator
compartment to thaw them and use
the coldness of the frozen foods to
cool other foods.
6. Switch the device back on.
7. Stock up on food.
8. Check after 24 hours if odors have
reappeared.
■
Defrost a layer of frost or ice in the
freezer compartment regularly.
A layer of frost or ice reduces the
delivery of cold to the
frozen foods and increases energy
consumption.
Lighting (LED)
The device is equipped with
maintenance-free LED lighting.
■
Open the appliance doors for as short a
time as possible.
Repairs to this lighting may only be
carried out by the after-sales service or
an authorized specialist.
■
To avoid increased power
consumption, the back of the device
should be cleaned from time to time.
■
If present:
Mount the wall spacer to achieve the
planned energy consumption of the
device (see
installation manual). A closer distance
to the wall does not affect the
operation of the device. The energy
consumption can then be slightly
higher. The distance of 75 mm should
not be
exceeded.
■
The arrangement of the equipment
parts does not affect the
energy consumption of the device.
97
Summary of Contents for KG E Series
Page 25: ...1 9 10 11 15 12 16 a 13 17 14 18 19 B 20 21 22 9 8 7 6 5 4 3 2 1 ...
Page 26: ... ...
Page 27: ... ...
Page 28: ...2 1 3 4 0 1 2 E No 3 4 ...