02.2019
14/18
H47.ELEKS005EN-00
Electromechanical systems
Operating instructions
A-opener 2.1
4.4
Display of status LED
LED
Buzzer
Description
Action
Comments
Green
Disturbance-free
Flashes
green
Opening signal is present at
terminal 4.
Flashes
yellow
Faulty contact of the connec
-
ting clamps
Check connecting clamps
Contact service partner if the
fault persists
Yellow
Limited function
Contact service partner
Red
Supply voltage defective
Have the supply voltage checked
Contact service partner if the
fault persists
Operating voltage exceeded
Check the ambient temperature
Red
Error in the control unit
Contact service partner
Flashes red
Block drive with opening
procedure
Check for mechanical sluggishness
Contact service partner if the
fault persists
Check whether the main deadbolt
has been extended via the profile
cylinder (child-proof lock active /
lever handle blocked)
= LED lights up
= LED flashes
•
To lock or unlock the door with the cylinder key, always turn it as far as it will go. The cylinder key must then be turned back
some way before it can be removed from the cylinder lock.
•
If the door is released automatically, it remains open for 3 s and an acoustic signal will be audible for this period.
•
The AS3500/3600 multi-point lock with A-opener 2.1 will return to the locking position if the door is not opened during this
period. The AS3500/3600 multi-point lock with A-opener 2.1 locks mechanically automatically if the door is closed.
•
Opening the door via cylinder lock, lever handle, or horizontal actuating rod is only admissible during motor shutdown.
•
If the AS 3500/3600 has been locked via the profile cylinder, the main deadbolt is extended and the lever handle is therefore
blocked (child-proof lock). An electric opening process may not be carried out in this case.
Summary of Contents for KFV
Page 2: ......