en
27
Interior fittings
All variable parts of the appliance can be
taken out for cleaning.
Take out glass shelves
Fig.
4
Lift the glass shelves, pull forwards,
lower and swivel out to the side.
Condensation channel
Fig.
+
Regularly clean the condensation
channel and drainage hole with a cotton
bud or similar implement to ensure that
the condensation can drain.
Take out shelves in the door
Fig.
5
Lift shelves upwards and take out.
Tips for saving energy
■
Install the appliance in a dry, well
ventilated room! The appliance should
not be installed in direct sunlight or
near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
■
Allow warm food and drinks to cool
down before placing in the appliance.
■
Thaw frozen food in the refrigerator
compartment and use the low
temperature of the frozen food to cool
refrigerated food.
■
Open the appliance as briefly as
possible.
■
Occasionally clean the rear of the
appliance to prevent an increased
power consumption.
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigerating
units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are
switching on/off.
Preventing noises
The appliance is not level
Please align the appliance with a spirit
level. Use the height-adjustable feet or
place packing underneath them.
The appliance is not free-standing
Please move the appliance away
from adjacent units or appliances.
Containers or storage areas wobble
or stick
Please check the removable parts and
re-insert them correctly if required.
Bottles or receptacles are touching
each other
Move the bottles or receptacles slightly
away from each other.
Summary of Contents for KF R Series
Page 70: ...1 2 6 1 4 7 8 10 9 11 5 12 0 2 4 1 2 3 4 6 8 super C 3 ...
Page 71: ...3 4 5 6 7 8 A ...
Page 72: ...8 B 9 B A 0 2 3 4 6 8 super C ...
Page 73: ... ...
