background image

en

    Trouble shooting

10

3

Trouble shooting

Trouble shooting

Sometimes certain faults detected can be easily 

resolved. Before calling the Technical Assistance 

Service, bear in mind the following advice:

Fault

Possible cause

Solution

The general electrical system 

is malfunctioning.

Defective fuse.

Check the fuse in the main fuse box and change it if it is 

damaged.

The automatic safety switch or circuit breaker has 

tripped.

Check the main control panel to see if the automatic safety 

switch or circuit breaker has tripped.

The automatic switching on 

function does not work.

There may be food or cleaning products stuck between 

the ignition sparkers and the burners.

The space between the ignition sparker and the burner 

must be clean.

The burners are wet.

Dry the burner caps carefully.

The burner caps are not correctly positioned.

Check that the burner caps are correctly positioned.

The appliance is not earthed, is poorly connected or the 

earthing is faulty.

Contact the installation technician.

The burner flame is not uni-

form.

The burner components are not correctly positioned.

Correctly place the parts on the appropriate burner.

The grooves on the burner are dirty.

Clean the grooves on the burner.

The gas flow is not normal or 

there is no gas.

The gas supply is blocked by gas taps.

Open all gas taps.

If the gas is supplied from a gas cylinder, check that it is 

not empty.

Change the gas cylinder.

The kitchen smells of gas.

A gas tap has been left on.

Turn off the taps.

Incorrect coupling of gas cylinder.

Check that the coupling is sound.

Possible gas leak.

Shut off the gas supply, ventilate the premises and imme-

diately notify an authorised installation technician to check 

and certify the installation. Do not use the appliance until 

ensuring that there is no gas leak in the installation or 

appliance itself.

The burner immediately 

switches off after releasing the 

control knob.

The control knob was not held down for long enough.

Once the burner is on, hold the control knob down a few 

seconds longer.

The grooves on the burner are dirty.

Clean the grooves on the burner.

Customer service    

en

11

4

Customer service

Customer service

When contacting our customer service, please provide 

the product number (E-Nr.) and production number (FD) 

of the appliance. This information is given on the 

specifications plate located on the lower section of the 

hob and on the label in the user manual.
Please find the contact data of all countries in the 

enclosed customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You 

can therefore be sure that the repair is carried out by 

trained service technicians who carry original spare 

parts for your appliances.

Warranty conditions

In the unlikely event that the appliance is damaged or 

does not meet your expectations in terms of quality, 

please inform us as soon as possible. For the warranty 

to be valid, the appliance must not have been tampered 

with, or used inappropriately.
The applicable warranty conditions are those set out by 

the company's representative office in the country of 

purchase. Detailed information is available from retail 

outlets. Proof of purchase must be presented to obtain 

the benefits of the warranty.
We reserve the right to introduce changes.

7

Environmental protection

Environmental  protection

If the 

)

 symbol is shown on the specifications plate, 

bear in mind the following instructions:

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly 

manner.

The packaging of your appliance has been 

manufactured using only the materials which are strictly 

necessary to guarantee efficient protection during 

transport. These materials are 100% recyclable, thus 

reducing the environmental impact. You can also 

contribute to caring for the environment by following the 

advice below:

Dispose of the packaging in the appropriate 

recycling bin.

Before you get rid of an old appliance, make sure 

you disable it. Contact your local authority to find out 

the address of your nearest recycling centre to 

dispose of your appliance.

Do not pour used oil down the sink. Collect it in a 

sealed container and take it to an appropriate 

collection point or, failing that, place it in the rubbish 

bin (it will end up in a controlled dump; this is 

probably not the best option, but it will avoid 

contaminating ground water).

GB

0344 892 8999 

Calls charged at local or mobile rate.

IE

01450 2655 

0.03 € per minute at peak. Off peak 0.0088 € 

per minute.

This appliance is labelled in accordance with 

European Directive 2012/19/EU concerning 

used electrical and electronic appliances 

(waste electrical and electronic equipment - 

WEEE). The guideline determines the 

framework for the return and recycling of used 

appliances as applicable throughout the EU.

Summary of Contents for IQ500 EP6A Series













Reviews: