Siemens INSYS Pocket ISDN-TA, Operating Manual

Page: 20 / 44

14 Operating manual Pocket ISDN-TA
D Initiate outgoing call
Dials the number (D for Dial). The dial modifier "W", ">", "T", ";", "@" can be freely
inserted in the dial string; they have no influence on the dial procedure of the TA.
Must be the last command in AT command line.
Any character input while the POCKET ISDN-TA is dialing will cancel the dialing
procedure.
ATD< CALLEDnumber >[/< subaddr >][//< UUS1data >]
[, X [P xxx -][R ][N<nuipwd> ][G<cug> ]< X25number> ][ D<userdata >]]
CALLEDnumber : ISDN call number for a dialled B channel connection or
X.25 number for X.31 D channel
subaddr dialled subaddress
UUS1data transmitted data with UUS1 signalling
P : use packetsize xxx for X.25 connection
R : request the facility reverse charging
G : access to X.25 closed user group
O : Outgoing call from X.25 closed user group
N : use NUI and password with call setup
allowed chars: a-z, A-Z, 0-9.
(overrides setting of nui configuration command)
X25number : dialled X.25 call number (X.25 B channel only)
D : separator for userdata: "D" or ",": user data without protocol ID
"P": user data with protocol ID (“01000000“)
ATDL Dial the last dialled number
ATDS= n Dial number n from stored telephone number list ( n = 1..3)
(See command AT&Z to store numbers)
ATD< CALLEDnumber >e Make a call for remote management (see note).
Note1:
To setup the own subaddress see configuration command sub .
Note1: Adding an "e" to CALLEDnumber indicates that a connection to the
internal remote access of a POCKET ISDN-TA shall be performed, the
protocol X.75 (ATB10) has to be used.