Notes Regarding the Use of the Manual
Pocket Modem 56k
Dezember 05
2
3
Notes Regarding the Use of the Manual
¾
This manual uses the symbol
for especially important notes. Further
notes will be marked accordingly.
¾
All factory settings are marked with “default”.
Example (Chap. 5.7.3): Enter old password (default: QWERTY)
¾
In the Chapters 4 to 6, the description consists of two columns. On the left
side, the individual functions are described. The according
AT
commands
and the modem responses can be found in the right column.
Function
description
AT
command
Example (Chap. 5.2.7):
After the hardware reset, load the user profile 1
ATZ1
¾
All
AT
commands start with the letters
AT
and end with a “Return”
(Carriage Return - CR).
AT
commands can be entered in capital or small
letters. The command is evaluated as soon as the modem received a
return.
¾
In the following, the used syntax is explained:
•
ATDT AT
command (font: Courier, bold)
•
<
Expression>
Input of a parameter (font: Courier, bold)
•
[
Expression]
Input of an optional parameter
(Font: Courier, bold)
•
Expression
Response from the modem (font: italic)
Examples:
•
ATDT<n>
Dialing of the phone number
<n>
ATDT1234
Dialing of the phone number
1234
•
+
•
AT+MS=<Modulation>
,
[Automode]
Selection of the modulation
type
AT+MS=V92
Selection of the modulation
type
V.92
AT+MS=V92,1
Selection of the modulation
type V.92 with automatic
adjustment
•
Connect
The connection to the remote terminal is
established
>
Input prompt during the
remote configuration.
