Siemens HX74W.30Y, Instruction Manual

Page: 15 / 32

15
Programming the oven
There are different ways to programme the oven. Programming
the type of heating, temperature or grill power. The oven can be
programmed with the cooking time (duration) and the end time
for each dish. For more information, see the chapter Setting the
time functions .
Note: We recommend preheating the oven before inserting the
food in order to avoid condensation on the oven glass.
Type of heating and temperature
Example in the picture: Top/bottom heating at 190 °C
%
.
1.
Use the function selector to set the type of heating.
2.
Set the temperature or grill setting using the temperature
selector.
The oven heats up.
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.
Rapid heating
With the rapid heating function, the oven reaches the
programmed temperature very quickly.
Rapid heating must be used for temperatures of more than
100 ºC. The following types of heating are appropriate:
■
3D hot air
:
■
Top and bottom heating %
To ensure uniform cooking, the food must not be put into the
oven until rapid heating has been completed.
1.
Select the temperature and type of heating required.
2.
Briefly press the h button.
The display panel shows the c symbol. The oven will begin to
heat up.
End of rapid heating
A beep will sound. The
c
symbol disappears from the display
panel. Put the food in the oven.
Cancelling rapid heating
Briefly press the
h
button. The
c
symbol disappears from the
display panel.
Setting the time-setting options
Your oven has various time-setting options. You can use the 0
button to call up the menu and switch between the individual
functions. All the time symbols are lit when you can make
settings. The N arrow shows you the time-setting option that is
active. A time-setting option that has already been set can be
changed direction with the
@
or
A
button when the
N
arrow is
next to the relevant time symbol.
Timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has its own signal. In this way, you can
tell whether it is the timer or a cooking time which has elapsed.
1.
Press the 0 button once.
The time symbols light up in the display and the
N
arrow is
next to
V
.
2.
Use the
@
or
A
button to set the timer duration.
Default value for
@
button = 10 minutes
Default value for
A
button = 5 minutes
After a few seconds, the time setting is adopted. The timer
starts. The N V symbol lights up in the display and the timer
duration counts down. The other time symbols go out.
The timer duration has elapsed
A signal sounds. 0:00 is shown in the display. Use the
0
button to switch off the timer.
Changing the timer duration
Use the @ or A button to change the timer duration. After a few
seconds, the change is adopted.
Cancelling the timer duration
Use the A button to reset the timer duration to 0:00. The
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the N arrow.
To call up the
V
timer,
x
cooking time,
y
end time or
0
clock, press the 0 button repeatedly until the N arrow is next
to the relevant symbol. The display shows the value for a few
seconds.
ƒ&