7
Setting the time on the clock
After the appliance has been connected to the mains or after a
power cut, three zeros and the "
A
" symbol flash on the display.
1.
Press the
0
button until the dot flashes on the display.
2.
Set the current time with the "+" and "-" buttons.
After seven seconds, the time that has been set is adopted.
Note:
To change the set time, press the "+" and "-" buttons until
the dot flashes on the display. Then set the current time with the
"+" and "-" buttons.
Setting the timer
The timer has no influence on the functions of the oven. The
duration of the timer can be set to between 1 minute and 23
hours and 59 minutes.
1.
Press the
0
button until the
V
symbol flashes on the display
and three zeros are displayed.
2.
Set the required cooking time with the "+" and "-" buttons.
An audible signal sounds once the time has elapsed.
Notes
■
To change the remaining time, press the
0
button until the
V
symbol flashes on the display. Then change the remaining
time with the "+" and "-" buttons.
■
To cancel the setting, press the
0
button until the symbol
flashes on the display. Then press the "+" and "-" buttons at
the same time.
Switching off the acoustic signal
Press the "
0
" button until the
V
symbol disappears.
After seven minutes, the signal switches off automatically.
Changing the audible signal
Three different audible signals are available.
1.
Press the "+" and "-" buttons simultaneously.
2.
Press the
0
button.
The current audible signal is shown in the display panel, e.g.
"Tone 1".
3.
Press the "-" button to select a different audible signal.
Setting the automatic timer
The electronic clock can be used to switch the oven on or off
automatically.
Automatic switch-off
1.
Press the
0
button until the
V
symbol flashes on the display
and three zeros are displayed.
2.
Press the
0
function button again until "
dur
" and "
0.00
" flash
alternately on the display panel and the "
A
" symbol flashes.
3.
Set the cooking time with the "+" and "-" buttons.
The cooking time can be set to between 1 minute and 10
hours.
4.
Set the required heating function and temperature.
The oven starts and the
A
symbol and the current clock time
appear on the display panel.
The cooking time has elapsed
An audible signal sounds, the
Û
symbol disappears from the
display panel and the
A
symbol flashes.
1.
Switch off the temperature selector and function selector.
2.
Press the
0
button until the
Û
symbol appears.
The oven switches back to manual mode.
Automatic switch-on and switch-off
Baking or roasting starts for the set duration at a later time
which you chose.
1.
Press the
0
button until the
V
symbol flashes on the display
and three zeros are displayed.
2.
Press the
0
function button again until "
dur
" and "
0.00
" flash
alternately on the display panel and the "
A
" symbol flashes.
The current time may be 17:30, for example.
3.
Set the cooking time (e.g. 1 hour) with the "+" and "-" buttons.
The cooking time can be set to between 1 minute and 10
hours.
4.
Press the
0
function button again until "
End
" and the switch-
off time "
18:30
" (i.e. the current time plus the set cooking
time) flash alternately on the display panel.
5.
Set the switch-off time (e.g. 19:30) using the "+" and "-"
buttons.
The switch-off time can be set to up to 23 hours and 59
minutes.
6.
Set the required heating function and temperature.
The
Û
symbol disappears from the display panel.
In this example, the oven starts at 18:30 and switches off
again at 19:30.
The cooking time has elapsed
An audible signal sounds, the
Û
symbol disappears from the
display panel and the
A
symbol flashes.
1.
Switch off the temperature selector and function selector.
2.
Press the
0
button until the
Û
symbol appears.
The oven switches back to manual mode.
Displaying and changing set values
The set values and the remaining time for the various operating
modes of the electronic clock can be viewed and changed on
the display panel at any time.
Displaying the remaining time for the timer
Press the
0
button until the
V
symbol flashes on the display.
The remaining time appears on the display and can be
changed with the "+" and "-" buttons.
Displaying and changing the cooking time and switch-off
time.
1.
Press the
0
button until the
V
symbol flashes on the display
panel.
2.
Press the
0
button again until "
dur
" and the remaining
cooking time flash alternately on the display panel and the
A
symbol flashes.
The cooking time can be changed with the "+" and "-"
buttons. Press the "+" and "-" buttons at the same time to
switch off the automatic timer.
3.
Press the
0
button again until "
End
" and the set switch-off
time flash alternately on the display panel.
The switch-off time can be changed with the "+" and "-"
buttons. Press the "+" and "-" buttons at the same time to
switch off the automatic timer.
