en
Basic operation
12
Setting
Water hardness in
mmol/l
German hardness in
°dH
French hardness °fH
3 (hard)
2.5-3.8
14-21.3
25-38
4 (very hard)
2
Above 3.8
Above 21.3
Above 38
1
Only set this if you will be using solely softened water.
2
Also set for mineral water. Only use non-carbonated mineral water.
7.2 Carrying out the initial configuration
When the appliance is connected to the electricity sup-
ply for the first time or following a lengthy power cut,
you must configure the settings before you can use it. It
may take a few seconds for the settings to appear on
the display.
Note:
You can also enter the settings using the Home
Connect assistant. In this case, press to go to the
last point in the initial configuration. If your appliance is
connected, follow the instructions in the app.
Setting the language
1.
Use the rotary selector to select the required lan-
guage.
2.
Press .
a
The next setting appears.
Setting the time
1.
Turn the rotary selector to set the current time.
2.
Press .
a
The next setting appears.
Setting the date
1.
Use the rotary selector to set the current day.
2.
Press .
3.
Use the rotary selector to set the current month.
4.
Press .
5.
Use the rotary selector to set the current year.
6.
Press .
Setting the water hardness
1.
Use the rotary selector to set the hardness.
2.
Press .
a
A notification appears on the display confirming that
the initial configuration is complete.
7.3 Cleaning the appliance before using it
for the first time
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
Remove the product information and the accessor-
ies from the cooking compartment. Remove any
leftover packaging, such as polystyrene pellets, and
any adhesive tape either in or on the appliance.
2.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Fill the water tank .
4.
Press
to switch the appliance on.
5.
Apply the following settings:
Type of heating
4D hot air with added
steam ("high" intensity)
Temperature
Maximum
Cooking time
1 hour
6.
Press
to start the operation.
‒
Ventilate the kitchen while the appliance is heat-
ing.
7.
When the cooking time has elapsed, press
to
switch the appliance off.
8.
Once the appliance has cooled down, clean the
smooth surfaces in the cooking compartment with a
detergent solution and a dish cloth.
9.
Empty the water tank and dry the cooking compart-
ment.
→
"After every steam operation", Page 17
10.
Clean the accessories thoroughly using a detergent
solution and a dish cloth or soft brush.
8 Basic operation
8.1 Switching on the appliance
▶
Press
to switch the appliance on.
‒
The
button lights up blue.
a
The Siemens logo appears in the display. A type of
heating and a temperature are then displayed.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
▶
Press
to switch the appliance off.
‒
The light above the
button goes out.
a
The appliance switches off. Any functions currently
in progress are cancelled.
a
The time or residual heat indicator appears in the
display.
8.3 Starting operation
You must start each cooking operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
▶
Do not use the appliance if there is water on the
cooking compartment floor.
▶
Wipe away any water on the cooking compartment
floor before operation.
▶
Press
to start the operation.
a
The settings, the run time and the heat-up line ap-
pear on the display.
Summary of Contents for HR676GB.6B
Page 43: ......
