Regulatory information
A31003-W1110-U101-1-7619, February 2007
24
HiPath Wireless Standalone Access Point V1.0, Getting Started Guide
HSAAP_Regulatory.fm
AP2630 Internal Antenna AP, AP2640 External Antenna AP
2.1.3
European Community
The Standalone Access Point—AP2630 and AP2640 (AP26XX series) is designed for use in
the European Union and other countries with similar regulatory restrictions where the end user
or installer is allowed to configure the Standalone Access Point for operation by entry of a
country code relative to a specific country. During configuration the software will prompt the
user to select a country code. After the country code is selected, the Standalone Access Point
will be set up with the proper frequencies and power outputs for that country code.
Although outdoor use may be allowed and may be restricted to certain frequencies and/or may
require a license for operation, the Standalone Access Point is intended for indoor use and
must be installed in a proper indoor location. Use the installation utility to ensure proper set-up
in accordance with all European spectrum usage rules. Contact local Authority for procedure
to follow and regulatory information. For more details on legal combinations of frequencies,
power levels and antennas, contact Siemens.
Declaration of Conformity with R&TTE Directive of the European Union 1999/5/EC
The following symbol indicates compliance with the Essential Requirements of the R&TTE
Directive of the European Union (1999/5/EC).
7
The Standalone Access Point is in compliance with the European Directive 2002/95/
EC on the restriction of the use of certain hazardous substances (RoHS) in electrical
and electronic equipment.
