Getting started with a Standalone Access Point
A31003-W1110-U101-1-7619, February 2007
52
HiPath Wireless Standalone Access Point V1.0, Getting Started Guide
HSAAP_Getting_Started.fm
Logging on to the Standalone Access Point
●
Logout
– Logs the current user out of the Standalone Access Point user interface.
5.2
Logging on to the Standalone Access Point
To access the Standalone Access Point, you must log on using a valid user ID and password.
By default, the Standalone Access Point is DHCP enabled. To log on, use the IP address
according to your network DHCP IP address assignment. If the Standalone Access Point
cannot get an IP address by DHCP, use the default 192.168.1.20 IP address.
To log on to the Standalone Access Point:
1.
In a Web browser, type the following:
http://192.168.1.20
2.
In the
User Name
box, type your assigned unique user ID.
3.
In the
Password
box, type the password corresponding to your user ID.
>
It is strongly recommended that you change your password the first time you log
on.
