Regulatory information
A31003-W1110-U101-1-7619, February 2007
34
HiPath Wireless Standalone Access Point V1.0, Getting Started Guide
HSAAP_Regulatory.fm
AP2630 Internal Antenna AP, AP2640 External Antenna AP
7
The user or installer is responsible to ensure that the Standalone Access Point is
operated according to channel limitations, indoor/outdoor restrictions, license
requirements, and within power level limits for the current country of operation. A
configuration utility has been provided with the Standalone Access Point to allow the
end user to check the configuration and make necessary configuration changes to
ensure proper operation in accordance with the spectrum usage rules for
compliance with the European R&TTE directive 1999/5/EC.
The Standalone Access Point with Internal and External antennas are designed to
be operated only indoors within all countries of the European Community. Some
countries require limited channels of operation. These restrictions are described in
this section.
>
Please follow the instructions in this user guide to properly configure the Standalone
Access Point.
●
The Standalone Access Point requires the end user or installer to ensure that
they have a valid license prior to operating the Standalone Access Point. The
license contains the region and the region exposes the country codes which
allow for proper configuration in conformance with European National spectrum
usage laws.
●
There is a default group of settings in each Standalone Access Point. There is
the ability to change these settings. The user or installer is responsible to ensure
that each Standalone Access Point is properly configured.
●
The software within the Standalone Access Point will automatically limit the
allowable channels and output power determined by the selected country code.
Selecting the incorrect country of operation or identifying the proper antenna
used, may result in illegal operation and may cause harmful interference to other
systems.
●
This device employs a radar detection feature required for European
Community operation in the 5 GHz band. This feature is automatically enabled
when the country of operation is correctly configured for any European
Community country. The presence of nearby radar operation may result in
temporary interruption of operation of this device. The radar detection feature
will automatically restart operation on a channel free of radar.
●
The 5 GHz Turbo Mode feature is not enabled for use on the Standalone Access
Point.
●
The
Auto
channel setting of the 5 GHz described in this user guide must always
remain enabled to ensure that automatic 5 GHz channel selection complies with
European requirements.
