Siemens Hipath 5000 Administration Manual Download Page 97

Page: 97 / 240

administration.fm

A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual

3-53

Administration

Transferring Phone Software, Application and Media Files

3.8.3

Phone Software

The firmware for the phone can be updated by downloading a new software file to the phone.

3.8.3.1

FTP/HTTPS Access Data

If the default FTP/HTTPS access settings (see section 3.8.2, “Common FTP Settings”) are to
be used,

Use default

must be set to "Yes", and only the

Filename

must be specified.

Data required (in every case)

•

Use default

: Specifies whether the default FTP/HTTPS access settings shall be used. Val-

ue range: "Yes", "No".

•

Filename

: Specifies the file name of the phone software.

Data required (if not derived from Defaults)

•

Download method

: Selects the protocol to be used.

Value range: "FTP", "HTTPS".
Default: "FTP".

•

Server

: IP address or hostname of the FTP/HTTPS server in use.

•

Server port

: Port number of the FTP/HTTPS server in use.

Default: 21.

•

Account

: Account at the server (if applicable).

•

Username

: User name for accessing the server.

•

Password

: Password corresponding to the user name.

•

FTP path

: Path of the directory containing the files.

•

HTTPS base URL

: IP address or hostname of the HTTPS server in use; only applicable if

Download method

is switched to "HTTPS".

Do not disconnect the phone from the LAN or power unit during software update. An
active update process is indicated by blinking LEDs and/or in the display.

Summary of Contents for Hipath 5000

















































































































































































































































Search results

Summary of Contents for Hipath 5000

Reviews:

Related manuals for Hipath 5000

Brands by name

Popular brands

Siemens Hipath 5000, Administration Manual

Search results

Summary of Contents for Hipath 5000

Reviews:

Related manuals for Hipath 5000

Brands by name

Popular brands